Hobbyboss 1/48 Saab J32 Lansen: Build & Improvements

Following Tarangus, it’s now manufacturer Hobbyboss’s turn to offer us a 1/48 scale kit of the Saab J32 Lansen.

J32 Lansen Hobbyboss 1/48 boxart

Air intake and airbrakes corrections

I’ll set the cockpit aside for a moment, as the first thing that caught my eye was the air intakes. They lack depth, and the scoops just above them are not molded open… a rather regrettable simplification. Fortunately, this can be easily bypassed with some plastic card. I also noticed the option to leave the airbrakes extended—a common sight on the ground—but this leaves gaping holes that are best corrected by adding internal bulkheads.


The cockpit

Once those steps were done, I tackled the cockpit. It required some work:

Don’t forget to add weight to the nose, as the rest of the assembly is straightforward.

J32 Lansen Hobbyboss 1/48 cockpit

Painting & Finishing:

I initially planned to recreate the aircraft currently flying, seen at RIAT 2022. This meant removing a pitot tube and revising all the antennas to match. In the end, the kit decals weren’t quite right: the underside markings were missing, the colors were slightly off, and the intake markings didn’t fit properly. As a result, I ended up with a “hybrid” aircraft: the configuration of the RIAT bird but with approximate markings.

The paint job was simple: Gunze H309 worked with yellow for tonal variety. The leading edges were finished with Alclad, and I did some light weathering on the underside.

Model finished !

Looking for more details? Check out our dedicated Saab J32 Lansen Walkaround (Photoscope) here to help with your build:
Saab J 32B Lansen (SE-RME) Walkaround: RIAT 2022 Photo Gallery