DesoléGriffin a écrit : sam. 1 juil. 2023 15:36 T'as pas une araignée avec laquelle sympathiser un peu ?
Bon, y'a celle au plafond qu'on a tous, mais elle risque de ne va pas aider beaucoup celle-là....![]()
CSM Caudron G.III - Hansa Brandenburg D.I -Bristol Scout - Caudron G.IV - Hanriot - Nieuport 11-16 1/32
Modérateur : master194
Re: Copper State Models Caudron G.III - Hansa Brandenburg D.I 1/32 - French R.1914 - Ehrhardt M1917 -Bristol Scout
Re: Copper State Models Caudron G.III - Hansa Brandenburg D.I 1/32 - French R.1914 - Ehrhardt M1917 -Bristol Scout
- Publicité
Re: Copper State Models Caudron G.III - Hansa Brandenburg D.I -Bristol Scout - Caudron G.IV - Hanriot 1/32
Source CSM Facebook :
https://www.facebook.com/copperstatemodels
[i]1/32 latest news [/i]
"Currently in our plans" (sequence is not yet décided)
32010 Caudron G.III Early Italian service
32011 Caudron G.III Anzani RNAS
32012 Caudron G.III trainer USA (decals with a US flag all over the fuselage and cowl and most likely Jules Védrines Caudron G.3s that landed on the roof of the Galeries Lafayette in Paris, winning a 25,000 franc prize)[/size]


32013 Hanriot HD.1
32014 Hanriot HD.2 hydravion
320xx Caudron G.IV different version, including hydravion
320xx Nieuport 11/16 enyone?
https://www.facebook.com/copperstatemodels
[i]1/32 latest news [/i]
"Currently in our plans" (sequence is not yet décided)
32010 Caudron G.III Early Italian service
32011 Caudron G.III Anzani RNAS
32012 Caudron G.III trainer USA (decals with a US flag all over the fuselage and cowl and most likely Jules Védrines Caudron G.3s that landed on the roof of the Galeries Lafayette in Paris, winning a 25,000 franc prize)[/size]


32013 Hanriot HD.1
32014 Hanriot HD.2 hydravion
320xx Caudron G.IV different version, including hydravion
320xx Nieuport 11/16 enyone?
Modifié en dernier par nicownw91 le lun. 11 déc. 2023 11:05, modifié 10 fois.
Re: Copper State Models Caudron G.III - Hansa Brandenburg D.I -Bristol Scout - Caudron G.IV - Hanriot 1/32
Avant, pour avoir un Caudron G.IV au 1/32 c'était soit rien ou faire du scratch.
(A noter le Caudron G.IV en scratch au 1/32 par Richard P. paru dans un ancien numéro de Wingmasters).
Suite a l'arrivée d'un Caudron G.III au 1/32 chez CSM, il était probable que CSM propose son Caudron G.IV au 32.
Amateurs d'aviation française réjouissez vous !
Le Caudron G.IV au 32 avec ses 2 moteurs va être une véritable bête !
Modifié en dernier par nicownw91 le mer. 26 juil. 2023 22:30, modifié 1 fois.
Re: Copper State Models Caudron G.III - Hansa Brandenburg D.I 1/32 - French R.1914 - Ehrhardt M1917 -Bristol Scout
C'était le sens de ma remarque, l'envergure au 48 est déjà conséquente....on sort du registre du petit chasseur là, rien ne laissait présager ça ( surtout que niveau investissement, ça doit être assez monstrueux aussi ! ).nicownw91 a écrit : mer. 26 juil. 2023 08:02 Le Caudron G.IV au 32 avec ses 2 moteurs va être une véritable bête !
Le vrai successeur de WNW en somme.
Re: Copper State Models Caudron G.III - Hansa Brandenburg D.I -Bristol Scout - Caudron G.IV - Hanriot 1/32
- Oui, avec un Caudron G.IV, on sort du petit chasseur.Griffin a écrit : mer. 26 juil. 2023 13:14C'était le sens de ma remarque, l'envergure au 48 est déjà conséquente....on sort du registre du petit chasseur là, rien ne laissait présager ça ( surtout que niveau investissement, ça doit être assez monstrueux aussi ! ).nicownw91 a écrit : mer. 26 juil. 2023 08:02 Le Caudron G.IV au 32 avec ses 2 moteurs va être une véritable bête !
Mais c’était déjà le cas avec le Caudron G.III au 1/32
Dans le Fana de l’aviation n°634 de septembre 2022, monographie du Caudron G.4 de David M :
Titre : Caudron G.4 un infatigable combattant
Intro : Le Caudron G.4 est l’un des appareils emblématiques de l’aéronautique militaire française de la Première Guerre mondiale, ayant survolé les champs de bataille de l’été 1915 à l’été 1917, puis maintenu en service dans des unités de seconde ligne jusqu’à l’armistice.
- Depuis l’annonce en 2019 du Nieuport 21 au 1/32 avec une grappe moteur Le Rhône 9c 80hp, il était possible et probable que CSM puisse proposer les avions suivants au 1/32 :
Caudron G.III
Bristol Scout C
Caudron G.IV et hydravion
Nieuport XI
L’arrivée d’un Caudron G.IV après le G.III était probable, compte tenu que CSM a déjà fourni un très gros travail de recherches et de conception sur le G.IV au 1/48.
Le Caudron G.IV au 1/32 est un choix et une décision de CSM.
Citation récente de CSM : Un membre sur facebook écrit : "Waiting (im)patiently for 32nd G.4" et CSM répond : « Totally with you on this one »
et CSM écrit : « the beast would look awesome »
- Le marché des avions ww1 penche vers le 1/32.
Citation récente de CSM : « The market is leaning toward 1/32 »
Raison pour laquelle CSM a mis en pause ses avions ww1 au 1/48.
- Au niveau investissement pour un Caudron G.IV au 1/32 :
il y a cette info : un Hansa brandenburg D.I au 1/32 représente 2 fois le prix du Caudron G.III (selon Edgar sur Facebook)
Etant donné que CSM a déjà effectué le travail de recherche et de conception pour le Caudron G.IV au 1/48, et que CSM à déjà la grappe moteur Le Rhône 9c 80hp pour le Caudron G.IV au 1/32, le coût ne devrait pas être monstrueux.
Re: Copper State Models Caudron G.III - Hansa Brandenburg D.I -Bristol Scout - Caudron G.IV - Hanriot 1/32
Source : Edgar de CSM
Lien : https://forum.ww1aircraftmodels.com/ind ... #msg257392
"Armoured cars, which we are doing, are not exotic, but the main AFV used in WWI: Lanchesters, Lancias, Canadian MG carrier, Renault 1914, all of them were important subjects for their time and we are doing them. Still need to kit Garford-Putilov, Tripoli Terno, Austin, all of them played a significant role.
We didn`t bother to make RR or tanks, since they are already on the market and it would be suicide to do the tank for example British one, from an economic point of view. We are just a small company (3 of us here, and that is including an accountant), with a modest budget to do the same model which will have a huge amount of runners/parts, that can afford only big companies, who can easily spend 70-80-100 000eur on a project. But again, 70-80-100 000 for a tank would be a price for an outside company that is ordering moulds for the kit, like ours. When you have the tools (workshop or a factory) and know-how, you can do it cheaper (per project) since you will be earning money not from doing the mould (like we are paying to the factory) but from selling a future kit (like eduard, Takom, Meng).
So it is important to invest money into something that can earn you money. After that, you can re-invest again in a new project, and/or re-box that kit again and again. We are here because we love WWI period, but to do that, we need carefully invest hard-earned money from the previously released kit into a new one. That is why we are spending more to offer up-to-date quality (for a price that we can afford) with all those old-looking instructions, to let you feel that period, with additional pre-order historical articles so you would know more about the subjects. I guess we are more like enthusiasts in this aspect, then business Companies.
That is why you need projects that can be re-boxes several times (like Nieuports or Fokker D.VII) not like Hansa Brandenburg D.I (only an example) - a great looking subject, but almost every machine differs from another, each may have its own feature and hard to re-box it later on.
[i]WWI aviation is even more expensive to produce, by the way, especially when we are talking about inline-engine models, and still, we are slowly getting there as well"[/i]
Lien : https://forum.ww1aircraftmodels.com/ind ... #msg257392
"Armoured cars, which we are doing, are not exotic, but the main AFV used in WWI: Lanchesters, Lancias, Canadian MG carrier, Renault 1914, all of them were important subjects for their time and we are doing them. Still need to kit Garford-Putilov, Tripoli Terno, Austin, all of them played a significant role.
We didn`t bother to make RR or tanks, since they are already on the market and it would be suicide to do the tank for example British one, from an economic point of view. We are just a small company (3 of us here, and that is including an accountant), with a modest budget to do the same model which will have a huge amount of runners/parts, that can afford only big companies, who can easily spend 70-80-100 000eur on a project. But again, 70-80-100 000 for a tank would be a price for an outside company that is ordering moulds for the kit, like ours. When you have the tools (workshop or a factory) and know-how, you can do it cheaper (per project) since you will be earning money not from doing the mould (like we are paying to the factory) but from selling a future kit (like eduard, Takom, Meng).
So it is important to invest money into something that can earn you money. After that, you can re-invest again in a new project, and/or re-box that kit again and again. We are here because we love WWI period, but to do that, we need carefully invest hard-earned money from the previously released kit into a new one. That is why we are spending more to offer up-to-date quality (for a price that we can afford) with all those old-looking instructions, to let you feel that period, with additional pre-order historical articles so you would know more about the subjects. I guess we are more like enthusiasts in this aspect, then business Companies.
That is why you need projects that can be re-boxes several times (like Nieuports or Fokker D.VII) not like Hansa Brandenburg D.I (only an example) - a great looking subject, but almost every machine differs from another, each may have its own feature and hard to re-box it later on.
[i]WWI aviation is even more expensive to produce, by the way, especially when we are talking about inline-engine models, and still, we are slowly getting there as well"[/i]
Re: Copper State Models Caudron G.III - Hansa Brandenburg D.I 1/32 - German Pz.Sp.Wg. 1ZM -French R.1914- Bristol Scout
Pré order du 5.3cm GRUSON FAHRPANZERnicownw91 a écrit : sam. 8 avr. 2023 07:08nicownw91 a écrit : sam. 19 mars 2022 18:30 In development 35011 plastic kit : GRUSON 5.3cm L/24 Farhpanzer
Source : https://m.facebook.com/copperstatemodels/?locale2=fr_FR
![]()
(boxart numéroté, livre de 40 pages) puis profils notice.
Usage pour Armoured carriages, fortresses, front lines et trenches.



Re: Copper State Models Caudron G.III - Hansa Brandenburg D.I 1/32 - French R.1914 - Ehrhardt M1917 -Bristol Scout
Bonnes continuations ! A + , Christian
Re: Copper State Models Caudron G.III - Hansa Brandenburg D.I -Bristol Scout - Caudron G.IV - Hanriot 1/32
Modifié en dernier par nicownw91 le mar. 9 avr. 2024 09:59, modifié 2 fois.






















